A320 BASE FLIGHT TRAINING

Description

The Base Flight is a scenario created to let the Trainee performs Touch and Go’s accompanied by the Instructor, in order to improve/recover his/her skills and proficiency. Gives the trainee the opportunity to experience the aircraft behavior in basic manoeuvers such as landing, flare, derotation, etc..


1- Cockpit Preparation

2- Engine Start

3- Taxi

4- Take Off – Extended Downwind

5- Visual Approach (ILS Supported if available)

6- Touch & Go (At least 3)

7- The trainee shall complete 1 circuit in manual thrust 

8- Go around all engines (At least 3)

9- Full Stop Landing / Full Reversers (At least 1)

Objectives and Standard Criteria to meet

- The primary objective is to practice approach and landing maneuvers.

- Become acquainted with the a320 visual pattern procedures.

- Become proficient with different approach configurations, weather conditions (X-wind) and no automation (FD/ATHR).

Training Program Duration: 5 Hours

1 Hour – Self Study

45 min – Briefing (Live Session)

2:30 Hours – Flight Live Session

45 min - Debriefing

LESSON 1

Description

Gives the trainee the opportunity to experience the aircraft behavior in basic manoeuvers such as landing, flare, derotation, etc..


Objectives

By the end of the lesson the Trainee will be familiar with:

TAXI - NORMAL – 90 DEG ONTO RWY 

TAXI - 180 ON RWY


TAXI - 180 BACK TRACK 

TAKE-OFF 

VISUAL CIRCUIT - ILS ASSISTED - TOUCH AND GO 

VISUAL CIRCUIT - NON ILS ASSISTED - TOUCH AND GO 

LOW LEVEL GO AROUND DUE TO BLOCKED RWY

LANDING IN CONFIG 3